CNC Flame Cutting Machine 4m Span Two Heads Double Servo Drivers
Economical and high effecient CNC flame/plasma cutting machine can
be applied in lot size straight steel plate cutting, as well as
various geometric shape cutting.
The main frame is annealed to remove the stress, stable and
endurable. The servo motor, reducer, pressure release valve, air
pipe and magnetic valve as well as cutting gun used are all world
famous brand to ensure excellent performance.
The CNC cutting machine uses imported AC motor, and driven with
imported bevel gear reducer. With precision gear and rack move, to
ensure stable function. Air cutting speed is adjusted by frequency
transformer. The air source control box on the main engine can
adjust air pressure from every tunnel easily. All the pressure
adjusting valve and main air pipe are original
|CNC plasma torch||Optional||Optional||Optional|
|Rapid return speed||3000mm/min||3000mm/min||3000mm/min|
|Flame cutting thickness||6-100/200mm||6-100/200mm||6-100/200mm|
|CNC flame torch||2 groups||2 groups||2 groups|
|Flame strip torch||9 groups||9 groups||9 groups|
Every CNC machine from the lowest cost and smallest to the largest
shipyard machine must have some form of the following components.
CNC control. The brains of the entire machine, converts cutting program into
electrical signals that direct the direction and speed that the
machine cuts at. Also signals the plasma cutter, height control and
other peripherals how and when to operate.
Mechanical components. Each machine has to have moving components such as a gantry (long
axis), a torch carriage and a Z-axis (up and down) that manipulate
and move the plasma torch to produce the cut parts desired.
Fume Control System. Plasma cutting generates a lot of fumes and smoke. Every machine
requires either a downdraft fume control or a water table control.
1. The CNC flame cutting machine is guide rail fixed, gantry gate
2. The flame cutting guns will cut the flange and web of H beam;
3. Cross arm operation accuracy is within 0.5mm/m;
4. Oxy and acetylene or oxy and acetonum gas as fuel source;
5. Guide rail length is 14M*2PCS;
6. X axis Panasonic servo and pilot reducer driven, Y axis
Panasonic servo and pilot reducer driven;
7. CNC system: Beijing SH-2000.
Frame unit: Beam, pipe, broadwise beam and longitude and broadwise reducer
Track unit: Guide and accessories. The guide size is 14m*2PCS.
Cutting torch unit: Linear single cutting gun*10PCS and
Electric control system: Electric control cabinet, longitude and
broadwise motors and accessories.
Gas source unit: Main air rubber pipe, suspending sliding vehicle
Spare parts: 1 set
30 days from contract.